Determine Whether The Account Code Or Caller Id Name Should; Acc; Cname (Default = 0); Line Feed (Default = 0) - NEC Univerge SV8100 Features And Specifications Manual

Issue 11.0
Program
Program Name
Number
35-02-17 SMDR Output Options – Print
Account Code or Caller Name of
Incoming Call
35-02-18 SMDR Output Options – Print
Mode for Caller Name of
Incoming Call
35-02-21 SMDR Output Options – S-Point
Terminal Number
35-02-22 SMDR Output Options – Security
Auto Dialing
35-02-23 SMDR Output Options – Watch
Auto Dialing
35-03-01 SMDR Port Assignment for
Trunk Group
2 - 1430
Description/Comments
Determine whether the Account
Code or Caller ID name should
print in the SMDR record.
Program 35-01-08 must be

set to 0 for this entry to be
followed.
Determine how SMDR should print
Caller Name of incoming call.
Select whether to display up to 16
characters of the Caller Name on
the same line as the call record (0)
or if a line feed should be added
and up to 24 characters of the
Caller Name are displayed on the
following line (1). If the line feed
option is selected, the Caller
Name is displayed on the next line
as : NEXT Caller Name.
This setting works regardless of
the setting in Program 35-02-15.
 With this option set to 1, if
your communications
program (such as
HyperTerminal) has the line
wrap option enabled in the
ASCII setup, an additional
line break may appear above
the Caller name line.
Set up SMDR Port 1.
Select whether the system should
display the SAD (Security Auto
Dialing) on SMDR report.
Select whether the system should
display the WAD (Warning Auto
Dialing) on SMDR report.
Assign the SMDR port for each
trunk group. For each Trunk
Group, select the SMDR port to
which the incoming SMDR
information should be sent.
UNIVERGE SV8100
Assigned Data

0 = ACC

1 = CNAME
(default = 0)
0 = Normal
1 = Line Feed
(default = 0)
0 = MSN Number
1 = Extension Number
(default = 0)
SMDR Port 1-8:
0 = No Output
1 = Output
(default = 0)
SMDR Port 1-8:
0 = No Output
1 = Output
(default = 0)
Trunk Groups: 1~100
SMDR Ports: 1~8
(default = 1)
Station Message Detail Recording
Level
1 2 3





