Wireless Dect (Sip); Table 2-150 Supported Wireless Dect (Sip) Features - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Enhancements
With Version 4000 (4.01 or higher) software, the SIP DECT handset can display the calling name on
an inbound call. This priority is fixed in system programming. With Version 4000, Program 15-05-17
is no longer used.
With Version 5000 (5.00 or higher) software, Off-hook signaling and Caller ID display after a call
transfer has been added.
With SV8100 Version 5000 (5.00 or higher) software and PZ-IPLB daughter board installed, half
duplex connections are not supported. For troubleshooting purposes, a managed switch capable of
port mirroring is required to capture packet data from the SV8100 IPLB Ethernet port.
With SV8100 Version 9000 (9.00 or higher) software, the system has the ability to receive DTMF
information in SIP INFO messages sent by Standard SIP Terminals. This allows the SIP Terminal to
initiate features during a ringing state such as Camp-On and Message Waiting.
Description
The Wireless DECT (SIP) (Digital Enhanced Cordless Telecommunication) system allows using DECT
6.0 DECT (SIP) handsets. These handsets provide the freedom and convenience of a wireless
telephone but also allow access to features provided by the UNIVERGE SV8100 system.
The number of Wireless DECT (SIP) handsets supported by the UNIVERGE SV8100 is dependant on the number of SIP

Table 2-150 Supported Wireless DECT (SIP) Features

Wireless DECT (SIP).

Feature Name
Account Code – Forced/Verified/Unverified
Account Code Entry
Alarm
Alarm Reports
Alphanumeric Display
Wireless DECT (SIP)
Client licenses.
Table 2-150 Supported Wireless DECT (SIP) Features
SIP
DECT
Yes
Yes
No
No
Yes
Wireless DECT (SIP)
lists the SV8100 features supported on the
Comments SIP DECT
IP Dect Handsets have Alphanumeric Display and are
backlit. However, the display is not updated with CPU
messages
Issue 12.0
2 - 2033