Epson BrightLink Pro 1420Wi User Manual page 279

Power light Status light
Blue Off
Off Flashing blue
Off Flashing blue
Flashing blue Varies
Lamp light Temp light
Off Off
Off Orange
Orange Off
Flashing Varies
orange
279
Status and solution
Standby or sleep mode.
Network monitoring mode. The
projector is being monitored and
controlled over the network.
Projector has overheated and turned
off. Leave it turned off to cool down.
After about five minutes, do the
following:
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug the
projector and contact Epson for
help.
Lamp has a problem.
• Check to see if the lamp is burned
out, broken, or installed incorrectly.
Reseat or replace the lamp as
necessary.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug the
projector and contact Epson for
help.
Replace the lamp soon to avoid
damage. Do not continue using the
projector.