Setting Up The Projector; Projector Placement; Projector Setup And Installation Options - Epson BrightLink Pro 1420Wi User Manual

Setting Up the Projector

Follow the instructions in these sections to set up your projector for use.

Projector Placement

Removing and Attaching the Cable Cover
Adjusting the Angle of the Touch Unit
Installing the Projector Feet
Projector Connections
Installing Batteries in the Remote Control
Installing Batteries in the Pens
Installing Batteries in the Control Pad
Projector Placement
Your ultra-short throw projector is designed to be installed on a wall (with a wall mount) or vertically on a
table (with a table mount) to create an interactive tabletop workspace.
Keep these considerations in mind as you select a projector location:
• Follow the instructions in the Installation Guide provided with your mounting hardware to install the
projector using the included mounting equipment.
• Leave plenty of space around and under the projector for ventilation, and do not place it on top of or
next to anything that could block the vents.
• Position the projector within reach of a grounded electrical outlet or extension cord.
• If installing vertically on a desk or table, the table projection mount (V12H516020) is required.
• If installing on a wall, the wall mount (V12H675020) is required.

Projector Setup and Installation Options

Projection Distance
Parent topic:
Projector Setup and Installation Options
You can set up or install your projector in the following ways:
Setting Up the Projector
35