NEC DT750 User Manual page 80

• TO CHANGE PASSWORD
To change an existing password, follow the procedure
below. This password is used for the following
occasions.
• To lock/unlock the telephone.
• To delete the directory data.
• To reset the telephone settings.
STEP 1: Display the Menu screen, and select Setting.
1
STEP 2: Select User Setting.
Select an item by one of the following operations.
• Touch panel operation.
• Highlight an item by using
or OK.
1
• Press .
[Setting]
1 User Setting
2
Download
Data Backup/Restore
3
↓
Menu soft key is Back soft key for the firmware version
TIP
before 4.0.0.0.
4
STEP 3: Select Change Password.
, and press ,
1/1
Menu OK
Select an item by one of the following operations.
• Touch panel operation.
• Highlight an item by using
or OK.
4
• Press
[User Setting]
1
Incoming Call
2 Talk
3 Display
4 Change Password
5 Security
6
Peripherals
7 Usability
STEP 4: Enter the old password.
After entering the old password, press
Set.
[Change Password]
Old Pass
New Pass
Retry Pass
BK
The initial password is "0000". When changing the
Note
password for the first time, enter "0000" as the old
password.
74
, and press
.
1/1
↓ Back OK
1
Set Cancel OK
,
or