Yamaha AVENTAGE RX-A1040 Owner's Manual page 87

❑ Using an external amplifier
Connect the external amplifier (with volume control) placed in Zone2 to the unit with a
stereo pin cable and connect speakers to the external amplifier.
The unit (rear)
ZONE OUT
(ZONE 2) jacks
ZONE OUT
L
R
ZONE 2
Main zone
External amplifier
Audio input
(analog stereo)
L
R
AUDIO
Zone2
■
Connecting a video monitor to play back analog videos
Connect a video monitor to watch analog videos at Zone2. Depending on the video
input jacks available on your video monitor, choose one of the video connection
methods.
• The video conversion between the analog video jacks does not work for Zone2 video output. To watch
videos played back on a video device on the Zone2 video monitor, you need to connect the video monitor to
the unit in the same way as the video device. For example, if you want to watch videos input from the DVD
player via a component video cable, connect the video monitor to the MONITOR OUT/ZONE OUT
(COMPONENT VIDEO) jacks with a component video cable.
The unit (rear)
MONITOR OUT/
Y P P
B R
P R
ZONE OUT
P B
Y
V
ZONE OUT jacks
(COMPONENT VIDEO or VIDEO)
Main zone
To assign the MONITOR OUT/ZONE OUT jacks to the Zone2 video monitor, set "Monitor
Out Assign" (p.122) in the "Setup" menu to "Zone2".
PLAYBACK ➤ Playing back music in multiple rooms (multi-zone)
Video input
(component video or
composite video)
COMPONENT VIDEO
Y P P
B R
P
R
P
B
Y
VIDEO
V
Zone2
87
En