Port Forwarding - D-Link AC750 User Manual

Section 3 - Configuration
This will allow you to open a single port or a range of ports.
Name:
Enter a name for the rule or select an application from the
drop-down menu. Select an application and click << to
populate the fields.
IP Address:
Enter the IP address of the computer on your local network
that you want to allow the incoming service to. If your
computer is receiving an IP address automatically from the
router (DHCP), you computer will be listed in the "Computer
Name" drop-down menu. Select your computer and click
<<.
TCP/UDP:
Enter the TCP and/or UDP port or ports that you want
to open. You can enter a single port or a range of ports.
Separate ports with a common.
Example: 24,1009,3000-4000
Schedule:
The schedule of time when the Virtual Server Rule will be
enabled. The schedule may be set to Always, which will
allow the particular service to always be enabled. You can
create your own times in the Tools > Schedules section.
Inbound Filter:
Select Allow.All (most common) or a created Inbound filter.
You may create your own inbound filters in the Advanced.
>.Inbound.Filter page.
D-Link DIR-816L User Manual

Port Forwarding

118