JVC HM-DH30000U Instructions Manual page 8

8
EN
S-VIDEO Connection
CONNECT VCR TO TV
a– Connect both the RF cable and the AV cables to the TV as
explained in step 3 of "Basic Connection" (
b– Connect the S-Video cable between the S VIDEO OUT
terminal on the rear of the VCR and the S-VIDEO input
connector on the TV.
Antenna or Cable
Coaxial Cable
Flat Feeder
Transformer
(not supplied)
AC Outlet
AC Power
S VIDEO OUT
Cord
Y P B /C B P /C
R R
R AUDIO L VIDEO
OUT
AUDIO
OUT
Audio Cable
(supplied)
S-Video Cable
S-VIDEO IN
TV
NOTES:
To make the most of the Super VHS picture performance we
recommend that you use the supplied S-VIDEO cable to
connect your VCR to a TV with an S-VIDEO input connector.
To operate the VCR with your TV using the S-VIDEO
connection, set your TV to the AV mode using the TV's
remote control.
You can also use the TV/VCR button on the VCR's remote
control to set your TV to the AV mode. (
When you play back the picture of 1080i, 720p, 480p image
format, the signal is not output from the S-VIDEO or VIDEO
output connector.
pg. 7).
ANTENNA IN
(Antenna or cable input)
Matching
CABLE BOX
VHF/UHF
ANTENNA
IN(L-1)
IN
R AUDIO L (MONO) VIDEO
REMOTE PAUSE/
AV COMPU LINK
TV
IN (L-2)
OUT
S VIDEO S VIDEO
OUT IN
(supplied)
RF Cable (supplied)
pg. 66)
INSTALLING YOUR NEW VCR (cont.)
Component Video Connection
CONNECT VCR TO TV
a– Connect both the RF cable and the AV cables to the TV as
explained in step 3 of "Basic Connection" (
b– Connect the component video cable between the
Component video output terminals on the rear of the VCR
and the component video input terminals on the TV.
Antenna or Cable
Component
Video Output
AC Outlet
AC Power
Cord
i.LINK IN/OUT
DV IN
S200
DIGITAL OUT
OPTICAL
PCM/DOLBY DIGITAL
Back of
VCR
AUDIO
OUT
Audio Cable
(supplied)
TV
NOTES:
To change the settings or set the timer program on the menu
screen, switch the TV's input mode for the connection with
Audio cable.
To view the picture of 480i image format on the TV, or to
select and view ground wave broadcast, connect the
component video cable to the TV's Y/C
your TV has only the Y/P
S-VIDEO or VIDEO connectors between the VCR and TV.
ANTENNA IN
(Antenna or cable input)
Coaxial Cable
Flat Feeder
Matching
Transformer
(not supplied)
CABLE BOX
Y P B /C B P /C
R R
IN(L-1)
R AUDIO L VIDEO R AUDIO L (MONO) VIDEO
REMOTE PAUSE/
AV COMPU LINK
IN (L-2)
S VIDEO S VIDEO
OUT
OUT IN
Component
Video Cable
(not supplied)
RF Cable (supplied)
/C
B R
/P connectors, connect also the
B R
pg. 7).
VHF/UHF
ANTENNA
IN i.LINK IN/OUT
DV IN
S200
DIGITAL OUT
OPTICAL
TV PCM/DOLBY DIGITAL
OUT
Back of
VCR
connectors. If