Flash Time - Panasonic KX-TA308 Installation Manual

4.2 System Programming

[418] Flash Time

Assigns the length of the flash time. If your system is installed behind a host PBX, External
Feature Access is necessary to obtain its services. To enable it, select the required flash
signal sending time for an outside (CO) line.
4
* Outside (CO) line number: 1 through 6 /
Default
• Feature References
Section 3, Features
External Feature Access, Flash
[419] Automatic Designated Outside (CO) Line Access
Selects which outside (CO) line can be seized automatically when an extension user dials the
Automatic Line Access number (9 or 0) assigned in program [121] "Automatic Outside (CO)
Line Access Number Selection".
4
* Outside (CO) line number: 1 through 6 /
Default
• Feature References
Section 3, Features
Automatic Outside (CO) Line Access Number, Outside Calling
1 8
NEXT
All outside (CO) lines – 600 milliseconds
1 9
NEXT
All outside (CO) lines – Enable
or
PREV
NEXT
outside line no.*
SELECT
(1···6/ )
(80/100/160/
300/600/900/
1200 ms)
SELECT
(All outside lines)
or
PREV
NEXT
outside line no.*
SELECT
(1···6/ ) (Enable/
SELECT
(All outside lines)
[418]-[419]
To continue
STORE
To continue
To continue
STORE
To continue
Disable)
System Programming
END
END
4-51