Advertisement
Every time recording is performed, the recorded event is stored in the clip list of the CF memory card. The clip list is stored with the
recorded event number (clip number) and the date/time when the recording was started. All events (clip numbers) can be played back
on the MOVIE CLIP screen.
STATUS
SHUTTER
MENU
SHUTTER
STATUS
FILTER
1
3200K
2
5600K
.3
5600K
.4
5600K
dial
button
SHUTTER
MENU
AUTO IRIS
BACK L
NORMAL
SPOT L
ON
POWER switch
● MOVIE CLIP will not appear during card
Insert an already recorded CF memory card.
initialization (flashing
display).
Turn on the GY-DV5000 and KA-DV5000 power.
Check to see that the
(When the power is turned on,
TOP MENU screen
Set the MODE switch to "VTR". (Light the VTR indicator.)
Make sure GY-DV5000 is not in operation.
Display the MOVIE CLIP screen.
q Press the STATUS button for about 1 seconds to display the TOP MENU screen.
w Turn the SHUTTER dial, move the cursor (t) to MOVIE CLIP and press the
Clip number
When a MOVIE CLIP menu item is se-
lected and the SHUTTER dial is pressed
with no clips recorded on the CF memory
card, "NO CLIP!" will flash for about 3
seconds.
If there is no CF memory card inserted,
"NO CF CARD!" will flash for about 3
Select the clip to play back.
seconds.
q Turn the SHUTTER dial and move the cursor (t) to the clip to play back.
CLIP FUNCTION screen
w Press the SHUTTER dial.
ASF files recorded using another device may not play back properly on this unit.
Selected clip number
Still image (starting point)
of the selected clip
BLANK SEARCH
REW
STOP
OPEN
EDITSEARCH
MONITOR
REW button
/
1 8
ND
1 64
/ ND
STATUS
POWER SUPPLY
LCD BRIGHT
DISPLAY
AUDIO
LEVEL
PULL
FRONT
OPEN
FULL AUTO
BLACK
LOLUX
REAR
CH-1
CH-2
CH-1
CH-2
switch
MODE
AUDIO INPUT
STRETCH
VTR
AUDIO SELECT
NORMAL
CH-1
CH-2
COMPRESS
CAM
MANUAL
AUTO
POWER
VTR
OFF
MODE
VTR
MODE switch
CAM
display appears on the LCD screen/viewfinder screen.
display will flash during initialization.)
SHUTTER dial.
● The movie clip list of the latest clip page recorded on the CF memory card
and the still image (starting point) of the latest clip number appear by overlap-
ping.
MOVIE CLIP screen
Date/time
Cursor
Latest clip
● Turning the SHUTTER dial up scrolls to the page with smaller (older) clip
numbers.
● Turning the SHUTTER dial down scrolls to the page with larger (newer) clip
numbers.
● Press the [FF] button to scroll to the next page. Press the [REW] button to
scroll to the previous page.
● Press and hold the [FF] button for about 2 seconds to scroll to the page with
the newest clip.
● Press and hold the [REW] button for about 2 seconds to scroll to the page
with the oldest clip.
CLIP FUNCTION screen of the selected clip appears.
● Still image (starting point) of the selected clip appears.
22
CLIP FUNCTION screen
FF
PLAY
STILL
REVIEW
FF button
● The video encoded by the KA-DV5000
is so designed that it is displayed in a
correct aspect ratio by personal
computer monitor. When the CF
played-back video is viewed by video-
out connector output of the GY-DV5000
or observed on a liquid crystal monitor
screen, the aspect ratio may look
different. This is because a simple
output is made on the video for a
personal computer and is therefore
normal and not a malfunction.
● When PLAY MODE in the MOVIE CLIP
The clip page in the
SET screen is set to "REPEAT", repeat
MOVIE CLIP screen dis-
playback is performed. ( page 7)
plays 4 lists per page.
● Playback will remain on the current clip
even when the FF button is pressed if the
latest clip is being played back.
● Pressing the REW button during play back
of the oldest clip will start playback at the
starting point of the that clip.
→
STATUS
SHUTTER
SHUTTER
dial
MENU
EDITSEARCH
MONITOR
FILTER
1
3200K
2
5600K
1 8
/
ND
.3
5600K
.4
5600K
1 64
/ ND
STATUS
SHUTTER
MENU
AUTO IRIS
FULL AUTO
BLACK
LOLUX
CH-1
MODE
NORMAL
BACK L
STRETCH
NORMAL
VTR
SPOT L
COMPRESS
CAM
PAGE BACK
POWER
VTR
ON
OFF
Play back the clip.
Turn the SHUTTER dial, move the cursor to REVIEW and press the SHUTTERdial.
● The movie clip is played back after the still image is displayed for about 1 sec-
ond. The value of the recorded pixel size (320 × 240 or 160 × 120) appears
during displaying the still image. The value of the recorded max. bit rate appears
during playback.
To pause playback, press the PLAY button.
To resume playback, press the PLAY button once more.
The following operations are performed when the playback of the selected clip
ends. (When PLAY MODE in the MOVIE CLIP SET screen is set to "OFF")
● When there are no following clips, the unit pauses at the beginning of the current
clip.
● When there are following clips, the unit displays the still image of the next clip for
about 1 second, then starts playback.
When all remaining clips are played back, the unit pauses at the beginning of the
played back clip.
\
\
● The playback of the current clip stops and the unit pauses at the starting point of the
next clip.
Pressing the FF button again pauses at the starting point of the following the next
clip.
\
● The playback of the current clip stops and the unit pauses at the starting point of
the previous clip.
Pressing the REW button again pauses at the starting point of the clip before the
previous clip.
\
● The unit pauses at the starting point of the latest clip.
To start playback, press the PLAY button.
\
● The unit pauses at the starting point of the oldest clip.
To start playback, press the PLAY button.
23
BLANK SEARCH
REW
STOP
FF
PLAY
STILL
OPEN
PLAY button
LCD BRIGHT
DISPLAY
AUDIO
LEVEL
OPEN
PULL
FRONT
REAR
FF button
CH-2
CH-1
CH-2
AUDIO INPUT
AUDIO SELECT
CH-1
AUTO
CH-2
MANUAL
REW button
Advertisement
