Canon imageRUNNER 2530 Service Manual page 277

6) Fix the controller plate with 3 screws (TP, M3x6).
7) Fix the rear cover (right) with 3 screws (RS-tight, M3x8).
8) Connect the power plug of the host machine to the power outlet and
turn its main power switch ON.
9
Installation > System Upgrade RAM-C1 Installation Procedure > Installation Procedure
9) Checking the Connection
9-1) Have the service mode display by pressing the following keys in order:
>2key>8key> In response, [#SSSW] appears.
9-2) Use left or right cursor [< / >] key and press [OK] when [REPORT] has appeared.
9-3) Use left or right cursor [< / >] key and press [OK] when [REPORT OUTPUT] has appeared.
9-4) Use left or right cursor [< / >] key and press [OK] when [SPEC LIST] has appeared.
9-5) SPEC REPORT is printed out. Confirm TOTAL MEMORY is [512MB] on the report.
9 Installation > System Upgrade RAM-C1 Installation Procedure > Installation Procedure
9-41
9-41