Set Lengths For Msi - Motorola CS3000 Manual

Set Lengths for MSI

Parameter # L1 = 0x1E, L2 = 0x1F
The length of a code refers to the number of characters (i.e., human readable characters) the code contains,
and includes check digits. Set lengths for MSI to any length, one or two discrete lengths, or lengths within a
specific range. See Table B-6 on page B-7
One Discrete Length - Select this option to decode only codes containing a selected length. For example,
select MSI Plessey One Discrete Length, then scan 1, 4, to decode only MSI Plessey symbols containing 14
characters. Select the length using the bar codes from
selection or cancel an incorrect entry, scan
Two Discrete Lengths - Select this option to decode only codes containing two selected lengths. For
example, select MSI Plessey Two Discrete Lengths, then scan 0, 6, 1, 4, to decode only MSI Plessey
symbols containing 6 or 14 characters. Select lengths using the bar codes from
4-48. To change the selection or cancel an incorrect entry, scan
Length Within Range - Select this option to decode codes within a specified range. For example, to decode
MSI symbols containing between 4 and 12 characters, first scan MSI Length Within Range, then scan 0, 4, 1
and 2 (include a leading zero for single digit numbers). Select lengths using the bar codes from
Codes on page 4-48. To change the selection or cancel an incorrect entry, scan
Any Length - Scan this option to decode MSI Plessey symbols containing any number of characters.
NOTE Selecting this option may lead to misdecodes for MSI codes.
for ASCII equivalents.
Numeric Bar Codes on page
Cancel on page 4-50.
MSI - One Discrete Length
Cancel on page
MSI - Two Discrete Lengths
MSI - Length Within Range
MSI - Any Length
Symbologies 4 - 43
4-48. To change the
Numeric Bar Codes on page
4-50.
Numeric Bar
Cancel on page 4-50.