Motorola CS3000 Manual page 38

iPad Pairing Example
For CS3070 scanners, to pair to an iPad:
Press the scan button (+) to wake the scanner.
1.
Press and hold the Bluetooth button (round button with Motorola logo) for five seconds. The scanner beeps
2.
and the Bluetooth button starts blinking quickly to indicate that the scanner is discoverable by the host.
NOTE HID is the default profile for the CS3070. If this was changed, scan
On the iPad, tap the
3. Settings
Tap from the list of options that appears.
4. General
General Menu
Figure 1-29
Tap . If Bluetooth is not enabled, swipe to enable it. The CS3070 appears in the
5. Bluetooth
indicated by its model name and serial number.
Bluetooth Devices
Figure 1-30
icon.
Getting Started 1 - 21
Bluetooth HID Profile on page
Devices
3-13.
list,