Sony TRINITRON KD-34XBR2 Service Manual page 310

Using the DTV Features
Setting the Clock
z
You can also access the
Timer through the Setup menu.
For details, see page 60.
46
5
Move the joystick V and v to set the day(s), time (hour, minute,
AM/PM), duration, and channel number. Press
confirm each setting and move to the next setting. Press
back to the previous setting.
6
After you've set the channel number, press
settings. The settings are displayed in the Timer screen and the
Timer is set to
On
The DTV is now set to turn on, tune to the channel you've set, and
then turn off at the times you set for that Timer. The Timer indicator
on the front panel indicates the Timer is set.
To turn a Timer setting on or off
❑
Select or step 3 (page 45).
On Off in
To change a Timer setting
❑
Set the timer ( Timer 1
overwritten.
To set a second Timer setting
❑
Set the other unset timer (
If you didn't set the clock during the DTV's initial setup (see page 31),
you need to set it before you can set either of the Timers.
1
Press TIMER .
The Timer Setup screen appears (as shown on pag e45).
2
Move the joystick V or v to highlight
3
Move the joystick V and v to set the current day and time (hour,
minute, and AM/PM). Press
each setting and move to the next setting. Move the joystick
go back to the previous setting.
4
When you finish setting the day and time, press
clock settings.
.
or Timer 2 ) again. The old timer setting is
or
Timer 1 Timer 2
Set the Clock
or move the joystick
or to
b
to go
B
to save the Timer
).
, then press
to confirm
b
B
to save the
.
to