JVC CX-7000 Series Electronic Manual page 25

Display Mode Setting
This is used for setting the information to be displayed on the
operation panel.
Settings
Counter:
Displays the counter preset in "Counter setting".
Laminator State:
Displays the operating status of the connected laminator. If a
laminator is not connected, the counter is displayed.
1
Press I
A [Cleaning] message appears.
.
2
Press J to set to [Setting]
Pressing it each time displays the next setting item.
.
3
Press G
A [Display] message appears.
.
4
Press G
A [Mode] message appears.
.
5
Press F
Enters the settings change mode.
.
6
Press A and select a setting
7
Press B to confirm the setting
Pressing B confirms the setting and returns you to the previous
screen.
8
Press H to exit the setting mode
Pressing it each time displays the setting item on the next higher level.
Counter Setting
This is used for setting the type of counter displayed on the
operation panel.
Counter Types
Total Cnt: total counter
Displays the total number of cards that are correctly printed.
Head Cnt: head counter
Displays the total number of printed sides for the same head.
Free Cnt: free counter
Displays the number of cards that are correctly printed. This number
can be reset.
Cleaning Cnt: cleaning counter
Displays the number of cards that are correctly printed after the last
cleaning.
Error Cnt: error counter
Displays the number of cards that are not correctly printed. This
number can be reset.
1
Press I
A [Cleaning] message appears.
.
2
Press J to set to [Setting]
Pressing it each time displays the next setting item.
.
3
Press G
A [Display] message appears.
.
4
Press G
A [Mode] message appears.
.
5
Press J to set to [Counter]
.
Operating the Printer
25