JVC CX-7000 Series Electronic Manual page 50

Troubleshooting
Error Code Jam(Transfer) 93
Card jam in the card feed roller.
.
1
Press KNB to reset the printer
.
The card is discharged from the NG card outlet.
.
50
If the card cannot be discharged
A Turn off the power, and detach the card hopper
.
B Open the printer door, and check the position of the jammed
card
C Attach the jog dial to the card feed roller shaft and cleaning roller shaft
.
.
D Turn the card feed roller shaft and cleaning roller shaft in the
clockwise direction, while checking the position of the card
.
Remove the card after it is discharged from the card load slot.
(For single-sided printers, the card is discharged from the NG
card outlet.)
Cautions:
If the card cannot be removed, do not try to do so forcibly.
Consult our authorized dealers or the servicing personnel.
E Restore the jog dial to its original position
F Install the card hopper, and close the printer door
G Turn on the power