Panasonic KX-TA624 Installation Manual page 184

S
S
ystem Data Default Set
Description
Condition
Programming Reference
Feature References
Operation Reference
S
ystem Programming with a Proprietary Telephone
Description
Conditions
Programming Reference
Feature References
Operation References
3-122 Features
This system can re-initialize the system-programmed data. If all the
programmed data is cleared, the system will restart using the
default settings.
• The default setting for each programming item is listed in Section 5.2,
"Default Values".
Section 4, System Programming
[999] System Data Clear
None
Section 2, Installation
2.9 System Data Clear
This system can be programmed with a proprietary telephone (PT).
Proprietary telephones available for system programming are:
KX-T7130, KX-T7030 and KX-T7135 (Display Proprietary
Telephones).
An extension connected to JACK 01 is allowed to perform system
programming.
For more information and programming instructions, refer to
Section 4, "System Programming".
• During system programming, the system operates normally.
• During system programming, the extension is regarded as busy.
• To access system administration, a valid password must be entered. The
password is factory-programmed and can be changed.
Section 4, System Programming
[002] System Password
None
Not applicable.
3 Features