Panasonic KX-TA624 Installation Manual page 279

4.2 System Programming
Conditions
Feature References
Host PBX Access Codes
• This program is only required if a host PBX is connected to the system.
• There is a maximum of eight access codes per outside (CO) line. Each
code has one or two digits, consisting of 0 – 9.
• When the programmed codes are dialed, Automatic Pause Insertion and
Toll Restriction are applied to all calls. The programmed pause time (in
program [417] "Pause Time") is automatically inserted after the access
code.
• To assign all outside (CO) lines to the same selection, press the
in step 3. In this case, the display will show: CO
Section 3, Features
External Feature Access
Host PBX Access
(contd.)
:Mixed.
Pause Insertion, Automatic
System Programming
403
key
4-65