Using the Cascade Connection via LAN (Up to 10 Points)
Installing the optional PCS-323M1 H.323 MCU software in two Video
Communication Systems enables cascade connection, allowing you to conduct
a multipoint videoconference among up to ten points.
PCS-323M1
H.323 MCU
software
Notes
• Installing the PCS-323M1 H.323 MCU software into three or more Video
Communication Systems does not allow cascade connection. Note that the third or
later terminals should set "Multipoint Mode" to "Auto" in the Multipoint Setup menu
or in the Setup menu.
• For cascade connection, the "Split" and "Split (Fixed)" modes are not available. Only
the "Voice Activate" mode is available.
UTP cable (category 5,
straight) (not supplied)
Connection Examples for a Multipoint Videoconference
PCS-
323M1
H.323
MCU
software
to
100BASE-
TX/
10BASE-T
to LAN
LAN
LAN
145