JVC DLA-SH4KNL Instructions Manual page 73

Setting (Changing) the IP address of this
projector
1
Launch the Internet Explorer on the
computer
2
Check if the proxy has been set in the LAN
Setting of the Internet Explorer
A Click Tools and select Internet Options
B Click Connections and click LAN Setting
C Check if the check for Use a proxy server for your
LAN has been selected
● If the check mark has been selected, deselect it.
Deselect the check
3
Check if the Active scripting of the Internet
Explorer is disabled
A Click Tools and select Internet Options
B Click in the order of Security
Sites
C Deselect the check in Required server verification
(https:) for all sites in this zone
D Enter http://192.168.0.2 under Add this web site
to the zone and click Add
E Click OK
F Select Trusted Sites and click Custom Level
G Check if the check for Active scripting under
Scripting has been selected
● If the check mark has been deselected, select it.
Select Enable
Trusted Sites