Table of Contents
Advertisement
Getting Started
Part Names and Functions
(VR-N1600U/E)
Front
OPERATE
A
B
REC CONTROL
C
A
[OPERATE] Button/Indicator
Switches operation on or off. Press the button to turn operation
ON and hold down the button to turn operation OFF . The
indicator blinks while the recorder is starting up or shutting down.
B
[REC CONTROL] Button/Indicator
Switches the recording control mode on or off. The indicator lights
up when the recording control mode is set to on.
Press and hold the [FUNCTION] button, and press the [REC
CONTROL] button at the same time to display the menu.
Memo :
● The main menu cannot be displayed in the recording control
mode or during recording.
● The recording control mode performs recording in accordance
with the settings in the [Camera Record Setting] menu.
(A Page 53)
C
[SELECT] Button/Indicator
Use the S key to set to the camera selection mode. The indicator
lights up when the camera selection mode is set to on. (A Page 36)
D
[PTZ/PRESET] Button/Indicator
Switches between the PTZ mode and PRESET mode of the S key.
The mode changes each time the button is pressed. The indicator
lights up when PTZ mode is selected and blinks when PRESET
mode is selected.
E
[SERIAL] Terminal
For connecting the communication control terminals on a mouse
(sold separately), flash memory (sold separately) or UPS (sold
separately).
Memo :
● Use the [SERIAL1 to 4] port on the rear panel for additional hard
disk drive connection. (A Page 14)
Note :
● Attach the serial port cover supplied with this product if this port
is not in use.
● This product may malfunction due to the presence of static
electricity. Remove any static before starting operation.
T
S
LIVE/BROWSE
SELECT
PTZ/PRESET
SERIAL
CANCEL
ZOOM OUT
ZOOM IN
ENTER
D
E
WARNING
ALARM
HDD
LOCK
FUNCTION
SEARCH
KEY
ALARM CLEAR
REC/STOP
F
G
H
I
J K
F
Status indicators
[WARNING] Indicator
Lights up when an error occurs. (A Page 151)
Press and hold the [ALARM CLEAR] button to turn off the light.
[ALARM] Indicator
Lights up when an alarm is activated.
Goes off when the [ALARM CLEAR] button is pressed.
[HDD] Indicator
Lights up when the built-in hard disk drive is accessed.
[LOCK] Indicator
Lights up when operation is locked. (A Page 22)
G
[FUNCTION] Button
Press the [FUNCTION] together with another button to use the
corresponding features.
[Special Key Operations] (A Page 134)
H
[SEARCH] Button
Displays the date and time search screen when in the playback
mode. (A Page 40)
I
[KEY] Button
When [KEY] button is pressed while pressing [FUNCTION] button,
key operation on front panel will be disabled. (Key locked mode)
To disable, perform same procedure again.
Press to display or hide the software keyboard .
Memo :
● Use the software keyboard to input characters. (A Page 28)
J
[ALARM CLEAR] Button
Clears the [ALARM] display when an event occurs or motion is
detected. Press and hold this button to turn off the [WARNING]
indicator.
K
[REC/STOP] Button
Press to start recording in all cameras. (When the recording control
mode is turned on, recording on all cameras starts after turning off
the recording control mode. ) Press and hold down to stop
recording.
When in the recording control mode, press and hold this button to
exit the recording control mode.
R
REV
STOP(PB)
PLAY
SKIP
L
M
N
Q
P
FWD
O
Advertisement
Table of Contents
