Starting System Administration - Siemens HiPath 500 Operating Instructions Manual

Starting System Administration

Step by Step
Program/Service
US: * 95=System admin?
UK: * 95=System features?
user: XXX
US:Identification: XXX
UK:Ident/Password: XXX
10
Starting System Administration
Before you begin, you must start system administra-
tion. Once system administration has been started, the
main menus and functions appear on the screen and
can be modified. For details on the individual functions
contained in the main menus, refer to the main menu or
submenu table
explanation of the various functions (note page refer-
ences).
Press the specified key. The LED lights up
Select and confirm.
or
qmi
Enter the code.
o
Enter user name
(Default ="
cian).
Confirm your entry.
o
Enter password
.(necessary only if you or your service technician de-
fined a password).
Confirm your entry even if you did not enter a pass-
word.
System administration is now active and the available
functions (main menu
page 12. This table is followed by an
95"; can be changed by your service techni-
*
If you are starting system administration for the
first time, do not enter a password. Just press
:
to accept the "US:Identification UK:Ident/
Password" prompt. You do not have to do this if
your service technician has already set up a pass-
word for you.
While the system will prompt you to enter a
password (up to 16 characters long), you can ig-
nore the request.
In either case, press
Once you have entered your password, you need
to enter it again.
Make a note of your password because even
your service technician cannot recover it later on.
page 12) appear on the screen.
:
to confirm.