Entering And Changing The Date And Time - Siemens HiPath 500 Operating Instructions Manual

Entering and Changing the Date and Time

Step by Step
12 Time
13 Date
ef
*
=Change
US:Save
UK:Confirm
16
Entering and Changing the Date
and Time
The date and time are stored automatically after an out-
going external call has been set up, provided that the
ISDN makes this information available.
If this is not the case or if your system is not connected
to ISDN trunks, you can enter or modify the time and
date yourself.
Prerequisite: System administration has been started
page 10.
Select and confirm.
or
or
eg
or Enter the code (time or date).
q
Enter the code.
or
Confirm.
o
Enter time or date.
Note the data format required for date entry:
• "Format hhmm" (hh = hour as two digits; mm = min-
utes as two digits); Example: 0905 for 9.05 h. (9.05
a.m.) or 1430 for 14.30 h. (2.30 p.m.).
• "Format: ddmmyy" (tt = day as two digits; mm =
month as two digits; yy = year as two digits); Exam-
ple: 171100 for the date 17 .11.00
Confirm your entry.