Mitsubishi Electric FR-F720-0.75K to 110K Instruction Manual page 335

REVISIONS
Print Date *Manual Number
May 2004 IB(NA)-0600177ENG-A
Oct. 2004 IB(NA)-0600177ENG-B
Mar. 2005 IB(NA)-0600177ENG-C
Jul. 2006 IB(NA)-0600177ENG-D
Apr. 2008 IB(NA)-0600177ENG-E
Sep. 2009 IB(NA)-0600177ENG-F
326 IB(NA)-0600177ENG-F
*The manual number is given on the bottom left of the back cover.
First edition
Additions
⋅ FR-F720 - 0.75K to 55K
⋅
FR-F740 - 110K to 160K
⋅
Pr.299 Rotation direction detection selection at restarting
Additions
⋅
FR-F720 - 75K to 110K
⋅
FR-F740 - 185K to 560K
Additions
⋅ Pr. 539 Modbus-RTU communication check time interval
⋅ Voltage/current input switch
⋅ Setting value "2" of Pr. 882 Regeneration avoidance operation selection
Additions
⋅ Additional explanation to "Causes and Corrective Actions"
⋅ Addition of setting values, "10" and "11" to Pr. 495 Remote output selection
Additions
Pr. 59 Remote function selection setting value "11 ", "12 ", "13 "
Pr. 29 Acceleration/deceleration pattern selection setting value "6"
Pr. 30 Regenerative function selection setting value "10", "11", "20", "21"
Pr.128 PID action selection setting value "110", "111", "120", "121"
Pr.167 Output current detection operation selection setting value "10", "11"
Pr. 261 Power failure stop selection setting value "21", "22"
Pr.522 Output stop frequency
Pr.653 Speed smoothing control Pr.654 Speed smoothing cutoff frequency
Pr.553 PID deviation limit Pr.554 PID signal operation selection C42 (Pr.934) PID dis-
play bias coefficient C43 (Pr.934) PID display bias analog value C44 (Pr.935) PID dis-
play gain coefficient C45 (Pr.935) PID display gain analog value
Pr.799 Pulse increment setting for output power
DC feeding operation permission signal (X70), DC feeding cancel signal
(X71), PID integral value reset signal (X72)
PID deviation limit signal (Y48), pulse output of output power signal (Y79),
DC feeding signal (Y85)
Partial changes
Pr.153 Zero current detection time setting range "0 to 10s"
5.5 Check first when you have a trouble
Revision