Upper Control Panel - Sony MSW-M2100 Operation Manual

2-1 Control Panels

2-1-1 Upper Control Panel

1 POWER switch
3 REMOTE buttons
REMOTE
POWER
1(9P)
PHONES
7 PHONES jack and control
1 POWER switch
Pressing the ' ) ' side of the switch powers the unit on.
When the unit is powered on, the audio setting display
section (see page 2-5) and the time data/menu display
section (see page 2-7) light.
2 NETWORK (network enable) button and
indicator (MSW-M2100E/M2100EP only)
The VTR can send MXF files containing video, audio
and metadata to devices connected via the RJ-45
network. When you press the button, it lights up.
Even when the button is off, web and SNMP
communications are enabled. When you press and
light the button, the REMOTE 1(9P) and 2 (50P)
buttons go dark.
When the VTR is connected by using RJ-45 control,
the NETWORK indicator lights.
The NETWORK indicator flashes during data
connection (MXF file transmission).
For details on the network functions using the NETWORK
button, refer to the Operation Manual of the BKMW-E3000
Network Interface Board.
2-2
Chapter 2 Location and Function of Parts
4 RS-232C indicator
5 EJECT button
6 Format indicators
BETACAM/SP BETACAM SX MPEG IMX
EJECT
2(50P) RS-232C
Z
MSW-M2100E/M2100EP
2 NETWORK button and indicator
3 REMOTE buttons
4 RS-232C indicator
REMOTE
NEWORK 1 (9P) 2 (50P) RS-232C
Digital BETACAM
Cassette compartment
3 REMOTE buttons
Press one of these buttons to select the device
controlling this unit.
1(9P): This unit is controlled by the device connected
to the REMOTE 1-IN(9P) or REMOTE 1-
OUT(9P) connector. The button lights.
2(50P): This unit is controlled by the device
connected to the REMOTE 2 PARALLEL I/
O(50P) connector. The button lights.
4 RS-232C indicator
This indicator lights when this unit is controlled
through the RS-232C connector.
5 EJECT button
To eject the cassette, press this button. While the
cassette is being ejected, this button lights.
When using the lower control panel as remote control
panel, press the DELETE button and STOP button at
the same time to eject the cassette.
Note
Ejecting with the EJECT button is a local operation. It
is not possible to eject a cassette in another unit by
remote control.
MSW-M2100/M2100P