Time Data Selection; Playback With Sdti-Cp Output - Sony MSW-M2100 Operation Manual

4-1 Preparations for Playback

4-1-2 Time Data Selection

Displayed time data
Use the CTL/TC setting in function menu HOME page
to select one of CTL (control), time code, and user bit
values. When you select time code, the data displayed
is determined by the TCR setting (LTC/AUTO/VITC)
in function menu page 1 as follows.
TCR setting Displayed data
LTC
LTC recorded on tape
AUTO
LTC or VITC (automatically switched)
VITC VITC recorded on tape
Output time code
The setting of setup menu item 606 determines
whether the time code output from the TIME CODE
OUT connector is the time code generated by the
internal time code generator (REGEN), or the
playback time code (TAPE).
4-1-3 Playback With SDTI-CP
Output
Irrespective of tape format, video and audio signals
can be played back only at normal playback speed.
4-2
Chapter 4 Playback and File Transfer