Yamaha YSP-1 Owner's Manual page 10

I[ol,/_R,//_i'
This unit creates surround sound by reflecting projected sound beams off the walls of your listening room. The surround
sound effects produced by this unit may not be sufficient when the unit is installed in the following locations:
• Rooms with surfaces inadequate for reflecting sound beams
• Rooms with acoustically absorbent surfaces
• Rooms with measurements outside the range: (3 to 7 m) x (2 to 3.5 m) x (3 to 7 m) (W x H x D)
• Rooms with less than 2 m from the listening position to the speaker positions
• Rooms where objects such as furniture are likely to obstruct the path of sound beams
i i !!!!!!/!!!!!!!!!!i ili!Ii/i II!it
• This manual describes how to connect and operate the YSP-1. For details regarding the operation of external
components, refer to the supplied owner's manual for the component.
• Some operations can be performed by using either the buttons on the main unit or on the remote control. In such cases,
the operation is described using remote control operation.
• -"_"- indicates a tip for your operation.
• This manual is printed prior to production. Design and specifications are subject to change in part as a result of
improvements, etc. In case of differences between the manual and product, the product has priority.
DiGiTAL
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic", and the double-D symbol are trademarks
of Dolby Laboratories.
"DTS", and "Neo:6" are trademarks of Digital Theater Systems,
Inc.
Manufactured under license from 1 Ltd. world-wide patents
applied for.
The " logo and "Digital Sound Projector" are trademarks of
1 Ltd.
Please check that you received all of the following parts.
Remote control (×1)
CZ3 CS? KS3
_KZ3
_.&yAMAH_
-. 2""-2_'2_.J
Batteries (×2)
(AA, 96, UM-3)
Cable Holder (xl)
Fastener (×4)
OSD Video Cable (×1)
Digital Audio Pin Cable (xl)
Audio Pin Cable (xl)
Optical Cable (×1)
Power Cable (×1)
4