Yamaha YSP-1 Owner's Manual page 15

This section describes how to choose a suitable installation location for this unit, and how to install the unit using either a
metal wall bracket, rack or stand.
If objects such as furniture are obstructing the path of sound beams, the desired surround sound effects )nay not be achieved. Make sure
you install this unit where there are no objects in the path of sound beams.
• Notes on installation
• When installing this unit, be sure to leave an adequate
amount of ventilation space so that heat can escape.
Make sure you leave at least 5 cm of space above
(or below) this unit (as shown in the illustration on the
right).
• We do not recommend installing this unit so that it is
positioned directly on the floor of your listening room.
Please install this unit using a metal wall bracket, rack
or stand.
• This unit weighs 13 kg (281bs). Be sure to install this
unit where it will not fall if subject to vibrations, such
as from an earthquake, and where it is out of the reach
of children.
• When using a cathode-ray tube (CRT) TV, do not
install this unit directly above your TV.
• This unit is shielded against magnetic rays. However,
if the picture on your TV screen becomes blurred or
distorted, we recommend moving the speakers away
from your TV.
5 cm or
more
Front Rear
To experience the best surround sound this unit can deliver, make sure you install this unit in a location where objects,
such as furniture, are not in the direct path of the sound beams (see the illustration below).
When installing this unit parallel to the wall, try placing it so that it is in the exact center of the wall (measured from the
left and right corners).
When installing this unit in the corner of your listening room, make sure the speakers are placed between 40° to 50° from
the adjacent walls.
An object, such as furniture
40 °to 50 ° ...
9