Pioneer PDP-425CMX Technical Manual page 55

4 Affix the accessory connector indicator label to the
Plasma Display then affix the remote control label
to the remote control that is furnished with the
Plasma Display.
S-VIDEO
S-VIDEO
PDA-5003
PDA-5004
Notes
Note
Use a soft cloth to gently wipe away any dust or soiling
from the surface before affixing the label.
Video Card Removal (Be careful not to insert
and remove it frequently).
1 Remove the two screws holding the video card.
S-VIDEO INPUT3 VIDEO INPUT4 INPUT 3/4
2 Holding the inside tabs, pull the video card straight
out.
Device
mounting
surface
S-VIDEO INPUT3 VIDEO INPUT4 INPUT 3/4
INPUT3 VIDEO INPUT4 INPUT 3/4 AUDIO ANALOG RGB INPUT5 AUDIO
HD (H/V SYNC)
INPUT3 INPUT4 AUDIO INPUT5
VIDEO INPUT3/4 ANALOG RGB AUDIO
(ON SYNC) (H/V SYNC)
IN OUT R L G B R HD VD R L
RGB (BNC)
COMPONENT
ANALOG RGB AUDIO
AUDIO INPUT5
HD (H/V SYNC)
Impedance
selector switch
75 Ω
2.2 kΩ
AUDIO ANALOG RGB INPUT5 AUDIO
HD (H/V SYNC)
Video Card: PDA-5003/PDA-5004
55