Pioneer PDP-425CMX Technical Manual page 67

6 Attach the hook on the PDP side hardware to the wall
side hardware.
Note
Do not hold the speakers during the installation work.
Hook
Opening
Closing
Always have at least 2 people do this task.
Verify that the hook has been hung before
Caution
lifting the Plasma Display into place.
7 Fix the bottom of the hardware with the special screws
removed at step 1 (one on the left and one on the
right).
Special screw (M6)
Tilt Mount Unit: PDK-5011
8 Install the under speaker (PDP-S39).
1 Connect the speaker cord to the terminal on the
speaker.
2 Place the speaker installation hardware on the
speaker. Using the screws that come with the
speaker, anchor both from the bottom (2 locations
on the left and right).
Note
Be sure to install the speaker with the hardware
attached vertically.
67