Indoor Unit Installation - LG AMNH096BTG0 Manuals

Installation

2) Indoor Unit Installation

Hanging bolt
(W3/8 or M10)
Nut
(W3/8 or M10)
Spring washer
(M10)
• The following parts are local purchasing.
Hanging Bolt - W 3/8 or M10
Nut - W 3/8 or M10
Spring Washer - M10
Plate Washer - M10
CAUTION
• Tighten the nut and bolt to prevent unit from
falling off.
Copyright ©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Keep the length of the bolt
from the bracket to 40mm
Flat washer for M10
(accessory)
Ceiling board
Flat washer for M10
(accessory)
Nut
(W3/8 or M10)
Adjust the same height
• Drill the piping hole on the wall slightly tilted to the
outdoor side using a Ø 70 hole-core drill.
- 66 -
Ceiling
Air Conditioner body
Set screw of
Paper model
for installation paper model (4 pieces)
Open the ceiling board
along the outer edge of the
paper model
Wall
Indoor
Ceiling board
Outdoor
LGE Internal Use Only