Sony HDV HVR-1500 Service Manual page 101

2 2
2 2 DV 2
1. Select the EQ AUTO ADJ.
2. Move the cursor displayed with a white background to the DV
using the 9, 0 keys and press the 8 key.
3. After the monitor display comes out as shown right, insert the
XH4-1A into the unit.
4. Press the [PLAY] key.
5. Confirm "COMPLETE" is displayed on the monitor.
To return to step 2, press the 7 key once.
To return to step 1, press the 7 key twice.
To return to the main menu, press the 7 key three times.
In the case of trouble :
If "INCOMPLETE" is displayed on the monitor ;
1 Send the small length of the tape forward and repeat step 2
again.
2 If "INCOMPLETE" is still displayed after performing 1,
check the RP-133 board (the EQ circuit).
3 3 DVCPRO 3
3 3
n
When the adjustment EQ AUTO ADJ of the DVCAM is executed,
the exactly same adjustment data is automatically reflected.
Therefore, do not execute this adjustment in the DVCPRO.
HVR-1500
4-35