Connecting The Graphics Monitor - HP xw8600 Workstation Hardware Setup Manual

Product key:
* Visual Effects and Finishing
# Lustre
Connect to second DVI out
on the main FX 5600 card
NVIDIA Quadro FX 5600
Storage 1,4 to SAN; 2,3 to Stone
To Wire network QUAD GigE
(InfiniBand switch option available)
ATTO 44ES FC opt storage (*)/
QUAD GigE - 0 to Control Surface,
NOTE This diagram depicts a Gigabit Ethernet (GigE) adapter located in PCI slot five. Your workstation may also
be configured with an optional QuickSilver InfiniSERV 9000 PCIe-DDR adapter. On the HP xw8600 workstation,
the PCI slots are numbered one to seven from top to bottom.

Connecting the Graphics Monitor

The graphics monitor connects to the Nvidia
connect the graphics adapter to its add-on card, the Nvidia Quadro SDI Output adapter.
14 | Chapter 3 Connecting Peripherals
To keyboard, mouse,
Monitor calibrator (#)
USB Tablet (*)
To Slave Renderer (#)
To house network (*)
NVIDIA Quadro FX SDI
To graphics monitor
ATTO 44ES FC
1 to LAN, 3 to SAN (#)
AJA OEM-2K
HP xw8600 Workstation
HD-SDI In (A) from 4:2:2 VTR (or 4:4:4 dual link)
HD-SDI In (B) from 4:4:4 VTR (dual link 0:2:2)
HD-SDI Out (A) to 4:2:2 VTR (or 4:4:4 dual link)
HD-SDI Out (B) to 4:4:4 VTR (dual link 0:2:2)
® ®
Quadro FX graphics card. This is also an opportunity to
Ref in from sync gen
HD-SDI (V2) Out 0:2:2/4:4:4
display device on VTR
HD-SDI (V1) Out 4:2:2 or 4:4:4
display device on VTR
DVI2 Out to FX5600 SDI
daughter card