HP 800 User Manual page 131

NOTE:
7. Enter the OID used to re-authenticate an endpoint in the Re-authenticate
OID text field. The strings "${Port}" and "${MAC_DOTTED_DECIMAL}"
will be substituted for the port and MAC address of the endpoint to be re-
authenticated.
figure 3-37. Add HP ProCurve WESM xl/zl Device on page 82 shows an
example for WESM zl.
Select the type of the re-authentication OID from the OID type drop-down
8.
list:
• INTEGER
• unsigned INTEGER
• TIMETICKS
• IPADDRESS
• OBJID
• STRING
• HEX STRING
• DECIMAL STRING
• BITS
• NULLOBJ
9. Enter the OID re-authentication value used to re-authenticate an endpoint
in the OID value text field.
10. Select the Use a different OID for MAC authentication check box to re-
authenticate using a different OID when the supplicant request is for a
MAC authenticated device.
a. Enter the Re-authenticate OID used to re-authenticate an endpoint. The
strings "${Port}" and "${MAC_DOTTED_DECIMAL}" are substituted
for the port and MAC address of the endpoint to be re-authenticated.
b. Select the type of the re-authentication OID from the OID type drop-
down list:
– INTEGER
– unsigned INTEGER
– TIMETICKS
– IPADDRESS
– OBJID
– STRING
– HEX STRING
– DECIMAL STRING
– BITS
– NULLOBJ
System Configuration
Quarantining, 802.1X
3-83