Selecting Action Taken - HP 800 User Manual

NOTE:
NOTE:
TIP:

Selecting Action Taken

Actions can be passive (send an email), active (quarantine) or a combination
of both.
To select the action to take:
Home window>>NAC policies>>Select a NAC Policy>>Tests menu option
1. Click on the name of test to display the test's options.
Click a test name to display the options; select the test check box to enable
the test for the policy you are modifying.
2. Select one of the following when an endpoint fails this test:
• Send an email notification – Sends an email to the email address
specified (see "Notifications" on page 3-116).
An email is sent for each retest.
Quarantine access – Specify when the endpoint should be denied
•
access.
immediately
–
grant temporary access
–
If you select a temporary access period here, the end-users are
allowed temporary access for the specified time, after which they
are denied access until they pass the test. The temporary access
period allowed is shown on the end-user results window (see
"End-user Access" on page 5-1).
The minimum amount of time you can grant temporary access is 10 minutes.
3. To use a patch manager:
a. select the Initiate patch manager to fix the problem and retest the endpoint
when it finishes check box.
b. Select a patch manager from the Patch manager drop down list.
Enter a number for the times to retest before failing in the Maximum
c.
number of retest attempts text box. For example. 10.
d. Enter a number of seconds between retests in the Retest interval text
box. For example 30.
NAC Policies
NAC Policy Tasks
6-17