Initial Setup; Auto Tuner Setup; Channel Summary - JVC TV 20240 User Manual

AUTO TUNER SETUP

During Auto Tuner Setup, the TV w i l l
automatically scan through all available
channels and memorize the active ones
so that when you scan, you do not pick
up weak or noisy channels.
Press any M
ENU
To AUTO TUNER SETUP
To operate
TUNER MODE :
START
To choose CABLE or AIR
To move to START
To start Auto Tuner Setup
NOW
PROGRAMMING!
48
The Programming takes approximately
1 to 2 minutes
PROGRAMMING OVER!
Note: Noise Muting will not work while
Auto Tuner Setup is working.
I N I T I A L
button
CABLE AIR

CHANNEL SUMMARY

You can add or delete channels from
channel scanning. You can also lock
out any "unauthorized" viewers from
one or up to all 181 channels.
Press any M
ENU
To CHANNEL SUMMARY
To operate
Note: Noise Muting will not work while
you are in the Channel Summary menu
SCAN
You can manually set channels to scan
that were too weak to be picked up
during Auto Tuner Setup. Conversely, if a
channel was too weak to receive a good
p i c t u re but was picked up anyway, delete
.
it by removing the (If you have not
p e rf o rmed the Auto Tuner Setup
described in the previous column, please
do so now.)
CH NO. SCAN CH NO .
0 1
0 2
0 3
0 4
0 5
C - / + to select the channel
H A N N E L
To the SCAN column
To add or delete from scan
E when finished
XIT
Note: Channels set to scan will be
.
marked with an
Note: Some cable systems experience
interference from radio frequencies on
Cable Channel 95. If you like, you can
delete this channel f rom scanning by
removing the
Continued next page ...
S E T U P
Button
.
SCAN
06
07
08
09
10
2
1
NOTES:
During Initial Setup,
the TV will be
programmed to
only receive active
channels. Once the
channels are
activated by the
Auto Tuner Setup
they will be includ-
ed in Scan.
Some weak
channels may be
included or omitted
during this
procedure. You can
add or delete any
channels from
scanning in the
Channel Summary.