Vcr Menu; Regular Vcr Programming - JVC TV 20240 User Manual

VCR MENU

The VCR Menu screen gives you a
number of options for operating your
VCR. For an explanation of how to
use on screen menus, see page 11.
*Press any of the M
ENU
display the menu screen.

REGULAR VCR PROGRAMMING

This function lets you manually input
the time, date and channel informa-
tion for a program you wish to
record. (To program your VCR using
VCR Plus+ codes see page 22)
To REGULAR VCR
PROGRAMMING
To operate
The following menu will appear.
To select DATE
To START (hour AM/PM)
To set the time you wish the
VCR recording to begin.
• When you press the Right
or Left arrow button, the
current time is first displayed.
To STOP
To set the time you wish the
VCR recording to end
V C R
buttons to
M E N U
To CHANNEL
To select the channel of the
program you wish to record.
To RECORDING SPEED
To select the recording
speed.
• SP - select to record at standard
speed.
• EP - select to record at 1/3 normal
speed.
To move to FINISH
To exit programming and
save your settings. The
following message will
appear:
YOUR PROGRAM IS CONFIRMED
PUSH THE TIMER BUTTON
The T button on the
IMER
remote control. The timer is
now in standby
The REC lamp will glow green on the
f ront panel of the unit, indicating the
timer has been programmed. When the
p rogrammed start time arrives, the REC
lamp will glow red and re c o rding will
begin. When the programmed stop time
a rrives, the lamp will go out and the
re c o rding will automatically stop.
N o t e : After re c o rding if there are other
p re-set programs the lamp will turn gre e n .
Notes on overlapping programs:
If the timer is set to re c o rd two diff e re n t
p rograms with overlapping times, the
second re c o rding will not start until the fir s t
is finished. For example if one timed
re c o rding is set to run from 5:00 to 6:00,
and a second is set from 5:30 to 7:00, the
second re c o rding will not start until 6:00
when the first finishes. If one pro g r a m
e n t i rely overlaps another - program 1 is
f rom 5:00 to 6:00, program 2 is from 5:30
to 6:00 - the second program will not
re c o rd.
I T E M S
R e c o rd i n g
s p e e d s
This VCR allows for
re c o rding and
playback at two
d i ff e rent tape
s p e e d s .
SP - Standard Play.
This setting gives
the best re c o rd i n g
and playback
qualities. It is the
time length indicat-
ed on blank video
c a s s e t t e s .
EP - Extended Play
This setting re c o rd s
and plays back at
1/3 the SP s p e e d
(for example a 120
minute cassette can
re c o rd for six hours
at the EP s e t t i n g ) .
H o w e v e r, video and
audio quality at EP
speeds are not as
good as those
re c o rded at SP
s p e e d s .
Other VCR
To check your
p ro g r a m m e d
settings press the
P . C
R O G
on the re m o t e
c o n t rol. See page
28 for more details.
For tro u b l e s h o o t i n g
on Timer Record i n g
see page 23.
2 0
NOTES:
N o t e s :
b u t t o n
H E C K