Antenna Connections - JVC TV-13143 User Manual

ANTENNA CONNECTIONS

If you are using outdoor antenna (outdoor antenna not included), follow the instructions below that
correspond to your antenna system. If you are using a cable TV service (CATV), see page 12 for Cable TV
connections.
Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)
75 OHM
COAXIAL
CABLE
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)
COMBINER
(not included)
Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)
COMBINER
(not included)
UHF 300 ohm
300-75 OHM
MATCHING
TRANSFORMER
(not included)
300-75 OHM
MATCHING
TRANSFORMER
(not included)
VHF 300 ohm
UHF 300 ohm
VHF 75 ohm
Connect the 75 ohm cable from the combination VHF/
UHF antenna to the antenna jack.
If your combination VHF/UHF antenna has a 300 ohm
twin-lead wire, the use of the 300-75 ohm matching
transformer may be necessary.
Connect the UHF 300 ohm twin-lead wire to the
combiner (not supplied). Connect the VHF 300 ohm
twin-lead wire to the 300-75 ohm matching trans-
former. Attach the transformer to the combiner, then
attach the combiner to the antenna jack.
Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the combiner. Attach the combiner
to the antenna jack.
11