Advertisement
2. Prepare for Play/Rec Signal Check.
3. Set the recorded MD in the unit.
4. Press the
normally. (When the
turns green.) Refer to
5. Remove the MD after check. (Continued to Recording Signal
Check.)
9.3.3. Recording Signal Check
1. After completing the item 5 of Playback Signal Check, connect to
the portable CD player (or any other player with an optical digital
output terminal). Refer to
2. Set the recordable MD.
3. Press the REC button. The REC LED (red color) blinks. Refer to
Fig. 9-4.
4. Playback the CD and press the
starts. Refer to
5. Press the
6. Playback the MD and check if the MD is recorded.
7. Remove the MD after check.
button and check if the MD play backs
button is pressed, the PLAY LED
Fig. 9-4.
Fig. 9-4.
Fig. 9-5.
Fig. 9-4.
button. (UTOC will be written.) Refer to
button. The recording
19
Fig. 9-4.
Advertisement
