Advertisement
6. Press the CD EDIT button and confirm that the reading of the
laser power meter is within the specified range. If it is not within
the specified range, adjust by turning VR1. Refer to
Specified range (read power): 600
Caution:
Proceeding on to the subsequent adjustment procedure with the
read power exceeding 600
optical pickup.
7. Press the CD EDIT button and read the write power.
Specified range (write power): 4.8 mW±0.1 mW
8. If it is not within 4.8 mW±0.1 mW, adjust by turning VR1. Refer to
Fig. 18-3.
Caution:
Do not allow the write power to even momentarily reach or exceed
5.5 mW. Doing so will result in damage to the optical pickup.
9. Press the CD EDIT button, the read power will be displayed again.
/ Confirm that the read power is within 540
10. Then, again press the CD EDIT button. The laser power recorded
in the laser ROM will be displayed.
Confirm that it is within 540
Fig. 18-3.
W or lower
W will result in damage to the
W ~ 660
W.
36
Fig. 18-3.
W ~ 660
W.
Advertisement
