Table of Contents
Advertisement
"B" display: Messages for incorrect operation are displayed for about 3 seconds.
They are displayed when the DISPLAY mode is ON or AUTO.
Display
INVALID TAPE!
Data tape for PCs or DVC PRO tape is used.
The cassette tape will be automatically ejected.
LP TAPE!
The user attempted to play back a tape recorded in the LP mode.
BR-HD50 cannot record or play in the LP mode.
NO HDV/DV SIG-
The user attempted to record without HDV or DV signal input.
NAL
COPY INHIBIT
The user attempted to record copy-guarded signals.
REC INHIBIT
The user attempted to record on a tape that is not ready for recording (the rear
switch is set to SAVE).
OPERATION
This message is displayed when an operation button is pressed with OPERA-
LOCK
TION LOCK enabled. To enable OPERATION LOCK, set OPERATION LOCK in
the SYSTEM [2/2] Menu screen to ON.
PB INHIBIT
This message is displayed when the HD/SD signal format setting differs during
[60/50]
playback of a tape recorded in HDV/DV format.
REC INHIBIT
• (for U model)
[60/50]
• (for E model)
50/25 INHIBIT
• When 60/50 SEL in the SYSTEM [2/2] Menu screen is set to 60, this message
• This message is displayed when the DV signal from the IEEE1394 terminal is
60/30 INHIBIT
• When 60/50 SEL in the SYSTEM [2/2] Menu screen is set to 50, this message
• This message is displayed when the DV signal from the IEEE1394 terminal is
This message is displayed when the unit is recorded in PAL mode.
This message is displayed when the unit is recorded in NTSC mode.
is displayed when HDV signal format is not 60Hz.
not NTSC.
is displayed when HDV signal format is not 50Hz.
not PAL.
Description
E-25
Advertisement
Table of Contents
