2.2 System Configuration
The UPS device and the internal backup battery make up the system. Depending on
the site and load requirements of the installation, available options may be utilized to
create a tailored solution.
Planning a UPS system should include the following considerations:
•
The total demand of the protected system shall dictate the output power rating
(VA). Allow a margin for future expansion or calculation inaccuracies from
measuring power requirements.
•
Backup time needed will determine the battery size needed. If the load is less
than the UPS nominal power rating then the actual backup time will be longer.
•
The following options are available:
•
External Battery Cabinets, and
•
Connectivity options (Remote Contact, SNMP/WEB card).
The following UPS models are available.
Backup time Internal
Model
UPS 1000VA
UPS 1200VA
Additional External Battery Cabinets are available if more back-up time is needed.
Recharge time to 90%
batteries
7 min
6 min
5
capacity
4 hours
4 hours