Toshiba Strata DK Interface Manual page 11

Plan the Interface
SpectraLink 6100 MCU
For the SpectraLink 6100 MCU, the handset function menu text can
only be changed via remote configuration through the services of
Polycom's Customer Support.
SpectraLink 8000 Telephony Gateways
Function menu text options can be changed in the Administration
Console of the SpectraLink 8000 Telephony Gateways.
Hold
The Hold feature should be programmed to the Hold key as shown
on the key-map diagrams so that when the key or softkey is
Hold
pressed on the handset, the call is placed on hold.
Mute
The handset Mute function is hard-coded to + on the PTB4xx
FCN 1
handset. This function sequence is recommended, but the system
administrator can assign the Mute function to any available function
key sequence or leave the function unassigned. The SpectraLink 6000
and SpectraLink 8020/8030 Wireless Telephones use a softkey.
Mute
Voicemail
The message-waiting icon on the handset is activated with the
message indication of the deskset. The MSG button must be
programmed using Program 39 if access from the handset is desired.
Speakerphone
The speakerphone function that is used in programming sequences
has been assigned + on the PTB4xx handset; the Vol and Mic
LINE 0
buttons on the 2020-SD have no corresponding handset function.
Speakerphone functions in the SpectraLink 6020 and 8020/8030
handsets are softkey driven.
Ring types
Handset ring types (soft, normal, vibrate, etc.) are programmed by the
handset user and are not accessible or changeable by the system
switch. Whenever possible the audible ringer on the handset will
11
1725-36145-001_D.doc