Toshiba Strata DK Interface Manual page 8

LinkPlus Interface Guide: Toshiba Strata DK/CTX System
8
"model" handsets then use the model as a template to program
the other handsets.
• All handsets are different: All handsets are programmed differently,
so each handset will be programmed individually.
Before installation, verify the features assigned to the wired
telephones to plan the system and extension programming required
for the handsets. If this site used the System Record Sheets (in the
Toshiba Strata Documentation) to record initial programming, you
may want to use the sheets to check existing programming and record
handset programming.
Line assignment
The handset supports up to nine line resources (including one
reserved for Intercom). Which trunks (outside lines) should ring at
this handset (Ringing Assignments) and which trunk will be selected
when the user goes off-hook (Automatic Preference)? What station
numbers will be assigned to the handsets?
Station hunting
To which alternate station will calls be forwarded when this handset
is busy or not answered? Should any of the handsets be designated as
the overflow for Incoming CO calls?
Group pickup
To which Pickup Group (if any) is this handset assigned?
Class of Service
Which features controlled by Class of Service should be assigned or
denied for the handsets?
Toll restrictions
To what class of toll restriction should this handset be assigned?
Flexible buttons
The handset supports 15 flexible feature buttons including nine line
resources. Determine which features, if any, should be programmed
PN: 1725-36145-001_D.doc