Panasonic EY7420 Service Manual page 9

Procedure 1A → 2A → 2B → 2C
Ref. No. 2C
Procedure 1A → 2A → 2B → 2C → 2D
Ref. No. 2D
Removal of Battery terminal block.
1. Take out the connector from the battery terminal block with a
screw driver.
Removal and assembly of motor assembly.
(Removal)
1. Unsolder to take out the lead wires.
(Assembly)
1. Use the isolation type of soldering iron (less than 80W).
2. Solder within 3 seconds with less than 400°C.
NOTE:
lead-free solder (Sn-3Ag-0.5Cu).
9