External Sync Signal Input Specifications - Pioneer HD-V9000 Technical Manual

6.3 External sync signal input specifications

Supported sync signals
Supported formats
Input SD 720×576/50i
level Format
720×480/59.9
4i
HD Format
Pull-in 720×576/50i
range
720×480/59.94i
1280×720/50p
1280×720/59.94p
1920×1080/50i
1920×1080/59.94i
Notes:
• For stable system operation, be sure to set the 75 Ω termination switch to On on the product before
input of external sync signals. (To prevent excessive signal input)
• To prevent malfunction, turn on an external sync signal generator before turning on the HD-V9000.
• Restart the HD-V9000 when any settings have been modified.
Known compatible sync generators
■
Note: The following is information on sync generators that have been confirmed to work with the
HD-V9000.
However, the listed devices are not guaranteed to operate under all operating conditions or
environments.
ASTRODESIGN SG-7810A Sync Generator
AJA GEN10
IMAGENICS SG-701
Bi-level (Black Burst)
Tri-level (HD tri-level sync signals)
720×576/50i
720×480/59.94i
1280×720/50p
1280×720/59.94p
1920×1080/50i
1920×1080/59.94i
0.450 Vp-p +/-6 dB or less
(Negative Sync: 0.300Vp-p,
Burst: 0.300Vp-p)
0.429 Vp-p +/-6 dB or less
(Negative Sync: 0.286Vp-p,
Burst: 0.286Vp-p)
0.600 Vp-p +/-6 dB or less
(Negative Sync: 0.300Vp-p,
Positive Sync: 0.300Vp-p)
Line frequency 15.625 kHz +/-10 ppm or
less
Line frequency 15.734kHz +/-10 ppm or
less
Line frequency 37.500kHz +/-10 ppm or
less
Line frequency 44.955kHz +/-10 ppm or
less
Line frequency 28.125kHz +/-10 ppm or
less
Line frequency 33.716kHz +/-10 ppm or
less
14
- -
HD-V9000 Technical Manual Ver. 1.00
Conforms to ITU-R BT.470
(black)
Conforms to SMPTE 170M
(black)
Conforms to SMPTE 296M
(black)
Conforms to SMPTE 296M
(black)
Conforms to SMPTE 274M
(black)
Conforms to SMPTE 274M
(black)
75Ω Load
75Ω Load
75Ω Load
HD Tri-level and BB sync
HD Tri-level and BB sync
BB sync