Pioneer HD-V9000 Technical Manual page 26

1-2 The video codec is outside the product
specifications (*1)
H.264/AVC.
1-3 The profile is outside the product
specifications (*1).
profiles> MP/422/422p/HP/H422
1-4 The signal format is outside the product
specifications (*1). <Product spec signal
formats> 720*480i/29.97fps
720*576i/25fps
1280*720p/59.94fps 1440*1080i/25fps
1440*1080i/29.97fps 1920*1080i/25fps
1920*1080i/29.97fps
Encoding settings-related
2-1 Bottom Field First
order has been encoded with "Bottom
Field First."
2-2 There is no sequence header.
sequence header has not been added.
2-3 The interlace cording is MBAFF. The video
has been encoded with [Interlace Cording =
MBAFF] in the H.264 interlace content.
Other
3-1 The video file is corrupted. (*2)
The video file is broken midway .
*1: Please refer to 7.2. Supported Formats.
*2: All the malfunction of a stream is undetectable.
Therefore, even if the Time Map Table is made, when there is a problem in actual behavior,
please carry out stream Check of the video file.
Failed to create Time Map Table. This video codec is
It is not MPEG2 or
not supported.
Failed to create Time Map Table. This Profile is not
<Product spec
supported.
Failed to create Time Map Table. This video signal
format is not supported.
1280*720p/50fps
The field Failed to create Time Map Table. Set parameter of
"Field Order" to "Top Field First" when encoding.
The GOP Failed to create Time Map Table. The Sequence Header
is not added.
Failed to create Time Map Table. This video signal
format is not supported.
Failed to create Time Map Table. The file may be
corrupted.
23
- -
HD-V9000 Technical Manual Ver. 1.00