LG BNU-BAC Installation & Owner's Manual page 27

3.Setting the net mask address
Press the buttons by the following order. And then, when the following menu is displayed on the
BACnet Gateway LCD screen, press the "MENU/SELECT" button to enter the net mask address.
MENU/
SELECT
Use the up/down/left/right button ( , , , ) to select the desired address.
MENU/
SELECT
3 After entering the last address, press the "MENU/SELECT" button to set the entered address
to the net mask address. (When there is no "MENU/SELECT" button input for 5 seconds, the
set value is ignored to return to the existing address.
MENU/
SELECT
[LCD screen]
[MENU]
Set Netmask
[Set Netmask]
255.255.255.000
[LCD screen after completing the setup]
BACnet Gateway
SW ver.1.0.0
How to install
[Set Netmask]
192.168.000.000
Installation/Owner Manual 27