Table of Contents
Advertisement
Internet Server User's Guide
•
COM1 / COM2
◊ ON: Each COM port LED provides an indication of the op-
erating status of the corresponding WAN port. When a
WAN port is transmitting data, the related COM port indi-
cator will light.
◊ OFF: No data is being transmitted.
•
Link/Rx (at far right)
◊ ON: The (internal) link between the Internet server's LAN
and Hub circuits is OK.
◊ OFF: The link between the Internet server's LAN and Hub
circuits is not working. If this condition persists, contact
your dealer for service.
◊ Blinking: The Internet server's LAN is receiving packets
from the Hub.
•
Tx (at far right)
◊ Blinking: The Internet server's LAN is sending packets to
the unit's Hub circuitry.
◊ OFF: The Internet server's LAN is not sending packets to
the Hub circuitry.
•
Partition (at far right)
◊ ON: The Internet server's LAN circuitry has been parti-
tioned, that is, cut off from the Hub circuitry, probably due
to excessive collisions or a hardware problem. If this condi-
tion persists, contact your dealer for service.
◊ OFF: The Internet server's LAN circuitry is not partitioned.
12
Installation
Advertisement
Table of Contents
