Lamp Unit Replacement And Care; Limited Canada Warranty - Toshiba 42HM66 Owner's Manual

8
Appendix

Lamp unit replacement and care

How to replace the lamp unit
TV COVERS, EXCEPT AS SPECIFIED HEREIN.
The light source for this TV is a mercury lamp with
internal atmospheric pressure that increases during
use. The lamp has a limited service life that varies
depending on product use and user settings.
As is generally the case with all projection TV's that
use projection lamps as a light source, the brightness
of the lamp in theis TV may vary somewhat overthe
expected service life and will generally decrease over
time. Because of the many variables that can affect the
useful service life of the lamp. your experience may
vary from other users.
Note : The lamp is warranted only for the periods and to
the extent set forth in the Limited Warranty applicable
to this set. See " Limited United States Warranty" (on
page 34) or "Limited Canada Warranty" (on page 35),
as applicable.
I fyou use t he l am p beyond i t s ser vi ce l i f e:
the picture; and
and the lamp may repture (often making a loud noise when
this happens). If the lamp reptures, the TV will not operated
until the lamp unit is replaced.
The lamp unit in this TV was designed for safe
replacement by consumers; however, if the lamp unit is
subjected to intentional abuse (such as excessive mechanical abuse
or hadling by children or pet) the unit may break, exposing sharp
edges or pinch points.
Manual Slotted screwdriver.
1. Turn off the TV and unplug the power cord.
viewing the light produced by this lamp. Always turn off
the TV and unplug the power cord before opening the
lamp unit door.
32
NEVER REMOVE
Eye damage may result from directly
Copyright © 2006 TOSHIBA CORPORATION. All rights reserved.
3. On the lamp unit door on the side of the TV, loosen the
screw by using a slotted screwdriver and then remove the
lamp unit door.
TV back
Lamp unit door detail
4. Using a Slotted screwdriver
or a coin, loosen the two
screws on the lamp unit.
The lamp unit door is provided with an
interlock to reduce the risk of electric shock and excessive ultraviolet
radiation.
follow this WARNING may result in death or serious injury.
5. Grasp the lamp unit handle and gently pull the lamp unit
straight out of the TV. Set the old lamp unit aside
Note: Wear soft, lint-free gloves
when replacing the lamp unit.
screw
Lamp unit screws
Failure to